{"title":"Lamborghini Aventador Exhausts","description":"\u003cp\u003ePerformance exhausts for the Lamborghini Aventador: cat-backs, valved systems, X-pipes, rear sections, headers and downpipes in titanium and stainless steel, built to order by VENUM Systems.\u003c\/p\u003e","products":[{"product_id":"venum-pl700-ti-ex","title":"Lamborghini Aventador LP700-4 – TC4 titanium mid-rear – Burnt blue","description":"\u003cp\u003eTC4 titanium mid-rear system for the Aventador LP700-4 — burnt blue titanium pipework with boxed silencers and burnt quad tips.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP700-4 (LB834) 6.5 V12 — 2011-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523037704577,"sku":"VEN-PL700-TI-EX","price":3695.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl700-ti-ex-1.jpg?v=1795041129"},{"product_id":"venum-pl700-ti-full","title":"Lamborghini Aventador LP700-4 – TC4 titanium full system – Burnt blue","description":"\u003cp\u003eFull TC4 titanium system for the Aventador LP700-4 — burnt blue titanium pipework with silencers, rear section and burnt quad tips.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP700-4 (LB834) 6.5 V12 — 2011-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523037737345,"sku":"VEN-PL700-TI-FULL","price":4495.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl700-ti-full-1.jpg?v=1795041129"},{"product_id":"venum-pl700-ss-full","title":"Lamborghini Aventador LP700-4 – Stainless full system","description":"\u003cp\u003eT304 stainless full system for the Aventador LP700-4 — polished pipework with rear silencer section and quad outlets.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP700-4 (LB834) 6.5 V12 — 2011-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523037802881,"sku":"VEN-PL700-SS-FULL","price":3295.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl700-ss-full-1.jpg?v=1795041129"},{"product_id":"venum-pl700-ss-ex","title":"Lamborghini Aventador LP700-4 – Stainless straight-through system","description":"\u003cp\u003eT304 stainless straight-through system for the Aventador LP700-4 — unsilenced straight pipework with quad outlets for the full V12 note.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP700-4 (LB834) 6.5 V12 — 2011-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523037868417,"sku":"VEN-PL700-SS-EX","price":3295.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl700-ss-ex-1.jpg?v=1795041130"},{"product_id":"venum-pl700-ss-dp","title":"Lamborghini Aventador LP700-4 – Stainless catless downpipes – Pair","description":"\u003cp\u003ePair of T304 stainless catless downpipes for the Aventador LP700-4 — straight-through decat sections replacing the restrictive OE catalysts.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDownpipes \u0026amp; resonator sections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP700-4 (LB834) 6.5 V12 — 2011-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523037933953,"sku":"VEN-PL700-SS-DP","price":1545.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl700-ss-dp-1.jpg?v=1795041130"},{"product_id":"venum-pl700-ss-svj","title":"Lamborghini Aventador LP700-4 – Stainless SVJ-style full system","description":"\u003cp\u003eT304 stainless SVJ-style full system for the Aventador LP700-4 — SVJ-inspired X-crossover pipework with quad outlets.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP700-4 (LB834) 6.5 V12 — 2011-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523037966721,"sku":"VEN-PL700-SS-SVJ","price":3295.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl700-ss-svj-1.jpg?v=1795041131"},{"product_id":"venum-pl700-ti-valved","title":"Lamborghini Aventador LP700-4 – TC4 titanium valved rear – Twin-loop – Burnt blue","description":"\u003cp\u003eTC4 titanium valved rear section for the Aventador LP700-4 — burnt blue twin-loop pipework with electric valve actuators and burnt quad tips.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eValved — electric actuators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP700-4 (LB834) 6.5 V12 — 2011-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038032257,"sku":"VEN-PL700-TI-VALVED","price":4895.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl700-ti-valved-1.jpg?v=1795041131"},{"product_id":"venum-pl700-ti-ex-b","title":"Lamborghini Aventador LP700-4 – TC4 titanium rear – Twin-loop – Non-valved","description":"\u003cp\u003eTC4 titanium rear section for the Aventador LP700-4 — burnt blue twin-loop pipework, non-valved, with burnt quad tips.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP700-4 (LB834) 6.5 V12 — 2011-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038065025,"sku":"VEN-PL700-TI-EX-B","price":4495.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl700-ti-ex-b-1.jpg?v=1795041132"},{"product_id":"venum-pl700-ti-full-v","title":"Lamborghini Aventador LP700-4 – TC4 titanium valved full system – Burnt blue","description":"\u003cp\u003eFull TC4 titanium valved system for the Aventador LP700-4 — burnt blue pipework with electric valve actuators and burnt quad tips.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eValved — electric actuators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP700-4 (LB834) 6.5 V12 — 2011-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038097793,"sku":"VEN-PL700-TI-FULL-V","price":4895.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl700-ti-full-v-1.jpg?v=1795041132"},{"product_id":"venum-pl700-ti-f1","title":"Lamborghini Aventador LP700-4 – TC4 titanium straight rear – F1 sound – Non-valved","description":"\u003cp\u003eTC4 titanium straight-through rear for the Aventador LP700-4 — unsilenced burnt blue pipework tuned for an F1-style V12 scream.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP700-4 (LB834) 6.5 V12 — 2011-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038163329,"sku":"VEN-PL700-TI-F1","price":4495.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl700-ti-f1-1.jpg?v=1795041133"},{"product_id":"venum-pl700-headers","title":"Lamborghini Aventador LP700-4 – Equal-length headers – Pair","description":"\u003cp\u003ePair of T304 stainless equal-length headers for the Aventador LP700-4 — mandrel-bent long-tube primaries into collectors, supplied bare or heat-wrapped.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHeaders \u0026amp; front sections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP700-4 (LB834) 6.5 V12 — 2011-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038261633,"sku":"VEN-PL700-HEADERS","price":2495.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl700-headers-1.jpg?v=1795041133"},{"product_id":"venum-pl700-headers-b","title":"Lamborghini Aventador LP700-4 – Stainless header collectors – Set","description":"\u003cp\u003eSet of T304 stainless header collectors for the Aventador LP700-4 — compact 2-into-1 collectors for the V12 bank pairings.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHeaders \u0026amp; front sections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP700-4 (LB834) 6.5 V12 — 2011-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038294401,"sku":"VEN-PL700-HEADERS-B","price":2495.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl700-headers-b-1.jpg?v=1795041134"},{"product_id":"venum-pl740-ti-valved","title":"Lamborghini Aventador LP740-4 S – TC4 titanium valved rear – Burnt blue","description":"\u003cp\u003eTC4 titanium valved rear section for the Aventador LP740-4 S — burnt blue titanium pipework with electric valve actuators and burnt quad tips.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eValved — electric actuators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP740-4 S (LB834) 6.5 V12 — 2017-2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038327169,"sku":"VEN-PL740-TI-VALVED","price":5395.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl740-ti-valved-1.jpg?v=1795041134"},{"product_id":"venum-pl740-ti-full","title":"Lamborghini Aventador LP740-4 S – TC4 titanium full system – Burnt blue","description":"\u003cp\u003eFull TC4 titanium system for the Aventador LP740-4 S — burnt blue titanium pipework with heat-wrapped front sections and burnt quad tips.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP740-4 S (LB834) 6.5 V12 — 2017-2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038392705,"sku":"VEN-PL740-TI-FULL","price":4995.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl740-ti-full-1.jpg?v=1795041134"},{"product_id":"venum-pl740-ss-valved","title":"Lamborghini Aventador LP740-4 S – Stainless valved rear section","description":"\u003cp\u003eT304 stainless valved rear section for the Aventador LP740-4 S — polished silencers with electric valve actuators and quad outlets.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eValved — electric actuators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP740-4 S (LB834) 6.5 V12 — 2017-2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038425473,"sku":"VEN-PL740-SS-VALVED","price":4195.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl740-ss-valved-1.jpg?v=1795041135"},{"product_id":"venum-pl740-ti-ex","title":"Lamborghini Aventador LP740-4 S – TC4 titanium rear section – Non-valved","description":"\u003cp\u003eTC4 titanium rear section for the Aventador LP740-4 S — burnt blue titanium pipework, non-valved, with burnt quad tips. Shown installed on the car.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP740-4 S (LB834) 6.5 V12 — 2017-2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038556545,"sku":"VEN-PL740-TI-EX","price":4995.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl740-ti-ex-1.jpg?v=1795041136"},{"product_id":"venum-pl740-ss-full","title":"Lamborghini Aventador LP740-4 S – Stainless full straight-through system","description":"\u003cp\u003eT304 stainless full straight-through system for the Aventador LP740-4 S — wrapped front sections into polished straight pipework with quad outlets.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP740-4 S (LB834) 6.5 V12 — 2017-2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038589313,"sku":"VEN-PL740-SS-FULL","price":3795.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl740-ss-full-1.jpg?v=1795041136"},{"product_id":"venum-pl740-ti-sb","title":"Lamborghini Aventador LP740-4 S – TC4 titanium valved rear – Sandblasted","description":"\u003cp\u003eSandblasted TC4 titanium valved rear section for the Aventador LP740-4 S — matte bead-blasted finish with electric valve actuators and quad tips.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eValved — electric actuators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP740-4 S (LB834) 6.5 V12 — 2017-2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038654849,"sku":"VEN-PL740-TI-SB","price":5395.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl740-ti-sb-1.jpg?v=1795041136"},{"product_id":"venum-pl740-ti-svj","title":"Lamborghini Aventador LP740-4 S – TC4 titanium SVJ-style X-pipe kit","description":"\u003cp\u003eTC4 titanium SVJ-style X-crossover kit for the Aventador LP740-4 S — burnt blue X-pipe with titanium connector sleeves and clamps.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP740-4 S (LB834) 6.5 V12 — 2017-2022\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038720385,"sku":"VEN-PL740-TI-SVJ","price":3850.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/pl740-ti-svj-1.jpg?v=1795041137"},{"product_id":"venum-plsv-ti-full","title":"Lamborghini Aventador LP750-4 SV – TC4 titanium full system – Burnt blue","description":"\u003cp\u003eFull TC4 titanium system for the Aventador LP750-4 SV — burnt blue twin-loop pipework with heat-shield wrapped headers and burnt quad tips.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP750-4 SV (LB834) 6.5 V12 — 2015-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038785921,"sku":"VEN-PLSV-TI-FULL","price":4495.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/plsv-ti-full-1.jpg?v=1795041138"},{"product_id":"venum-plsv-ti-straight","title":"Lamborghini Aventador LP750-4 SV – TC4 titanium straight-through system – Heat tinted","description":"\u003cp\u003eTC4 titanium straight-through system for the Aventador LP750-4 SV — heat-tinted unsilenced pipework, 76mm (3in) inlets with 70mm (2.75in) quad outlets.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP750-4 SV (LB834) 6.5 V12 — 2015-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038851457,"sku":"VEN-PLSV-TI-STRAIGHT","price":4495.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/plsv-ti-straight-1.jpg?v=1795041138"},{"product_id":"venum-psvj-headers","title":"Lamborghini Aventador LP770-4 SVJ – Heat-wrapped stainless headers – Pair","description":"\u003cp\u003ePair of T304 stainless headers for the Aventador LP770-4 SVJ — heat-shield wrapped equal-length primaries with sensor bosses and V-band flanges.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHeaders \u0026amp; front sections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP770-4 SVJ 6.5 V12 — 2018-2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038916993,"sku":"VEN-PSVJ-HEADERS","price":2495.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/psvj-headers-1.jpg?v=1795041138"},{"product_id":"venum-psvj-tips-burnt","title":"Lamborghini Aventador LP770-4 SVJ – Burnt titanium inner tips – Set","description":"\u003cp\u003eSet of burnt titanium inner tip sleeves for the Aventador LP770-4 SVJ — heat-tinted blue\/purple inlet sleeves for the OE-style quad tip housings.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP770-4 SVJ 6.5 V12 — 2018-2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523038982529,"sku":"VEN-PSVJ-TIPS-BURNT","price":1195.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/psvj-tips-burnt-1.jpg?v=1795041139"},{"product_id":"venum-psvj-ti-straight-b","title":"Lamborghini Aventador LP770-4 SVJ – TC4 titanium straight-through system – Burnt blue","description":"\u003cp\u003eTC4 titanium straight-through system for the Aventador LP770-4 SVJ — burnt blue unsilenced twin-loop pipework with quad outlets for the full V12 note.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP770-4 SVJ 6.5 V12 — 2018-2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523039048065,"sku":"VEN-PSVJ-TI-STRAIGHT-B","price":4995.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/psvj-ti-straight-b-1.jpg?v=1795041139"},{"product_id":"venum-psvj-ss-valved-w","title":"Lamborghini Aventador LP770-4 SVJ – Stainless valved rear – Heat-shield wrapped – 70mm","description":"\u003cp\u003eT304 stainless valved rear section for the Aventador LP770-4 SVJ — heat-shield wrapped twin-loop pipework with electric valve actuators, 70mm (2.75in) inlets.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eValved — electric actuators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP770-4 SVJ 6.5 V12 — 2018-2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523039113601,"sku":"VEN-PSVJ-SS-VALVED-W","price":4195.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/psvj-ss-valved-w-1.jpg?v=1795041140"},{"product_id":"venum-psvj-ss-valved","title":"Lamborghini Aventador LP770-4 SVJ – Stainless valved rear section – Polished – 76mm","description":"\u003cp\u003eT304 stainless valved rear section for the Aventador LP770-4 SVJ — polished twin-loop pipework with electric valve actuators, 76mm (3in) inlets.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eValved — electric actuators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP770-4 SVJ 6.5 V12 — 2018-2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523039179137,"sku":"VEN-PSVJ-SS-VALVED","price":4195.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/psvj-ss-valved-1.jpg?v=1795041140"},{"product_id":"venum-psvj-ss-valved-m","title":"Lamborghini Aventador LP770-4 SVJ – Stainless valved rear – Matte twin-loop","description":"\u003cp\u003eT304 stainless valved rear section for the Aventador LP770-4 SVJ — matte-finish twin-loop pipework with electric valve actuators. Shown installed on the car.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eValved — electric actuators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP770-4 SVJ 6.5 V12 — 2018-2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523039244673,"sku":"VEN-PSVJ-SS-VALVED-M","price":4195.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/psvj-ss-valved-m-1.jpg?v=1795041141"},{"product_id":"venum-psvj-tips-ss","title":"Lamborghini Aventador LP770-4 SVJ – Polished stainless quad tips – Set","description":"\u003cp\u003eSet of polished T304 stainless quad tips for the Aventador LP770-4 SVJ — wall-mounted replacement outlets with inner sleeves.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP770-4 SVJ 6.5 V12 — 2018-2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523039277441,"sku":"VEN-PSVJ-TIPS-SS","price":795.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/psvj-tips-ss-1.jpg?v=1795041141"},{"product_id":"venum-psvj-tips-black","title":"Lamborghini Aventador LP770-4 SVJ – Black stainless quad tips – Set","description":"\u003cp\u003eSet of black coated stainless quad tips for the Aventador LP770-4 SVJ — matte black outlets with polished inner sleeves.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eT304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP770-4 SVJ 6.5 V12 — 2018-2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523039342977,"sku":"VEN-PSVJ-TIPS-BLACK","price":795.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/psvj-tips-black-1.jpg?v=1795041142"},{"product_id":"venum-psvj-ti-straight-n","title":"Lamborghini Aventador LP770-4 SVJ – TC4 titanium straight-through system – Natural – 76mm","description":"\u003cp\u003eTC4 titanium straight-through system for the Aventador LP770-4 SVJ — natural-finish unsilenced twin-loop pipework, 76mm (3in) inlets with quad outlets.\u003c\/p\u003e\u003cp\u003eBuilt to order by VENUM Systems on a dedicated fitment jig, hand TIG welded with full back-purging, pressure tested and photo-documented before it is packed and shipped.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTC4 titanium (Ti-6Al-4V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eValves\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone — bolt-on section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMain pipe\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMatched to chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer model — confirmed at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCat-back \/ full systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLamborghini Aventador LP770-4 SVJ 6.5 V12 — 2018-2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMade to order – typical lead time 3–5 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWhy VENUM\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-penetration, back-purged TIG welds\u003c\/li\u003e\n\u003cli\u003eJig-verified fitment on the real chassis layout\u003c\/li\u003e\n\u003cli\u003ePressure tested and documented before dispatch\u003c\/li\u003e\n\u003cli\u003eFoam-protected packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eFitment is confirmed against your VIN \/ chassis before production. Contact us before ordering if you need a specific tip finish, valve option or pipe size.\u003c\/em\u003e\u003c\/p\u003e","brand":"VENUM Systems","offers":[{"title":"Default Title","offer_id":56523039408513,"sku":"VEN-PSVJ-TI-STRAIGHT-N","price":4995.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/0504\/9308\/files\/psvj-ti-straight-n-1.jpg?v=1795041142"}],"url":"https:\/\/150motorsport.com\/collections\/lamborghini-aventador-exhausts.oembed","provider":"150 Performance","version":"1.0","type":"link"}